Linux version 2.6.18-rc4 (dave@kernel) (gcc version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)) #1 SMP Mon Aug 14 10:06:00 PDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000e7ff9380 (usable) BIOS-e820: 00000000e7ff9380 - 00000000e8000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 2815MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 0009e1d0 DMI 2.3 present. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: IBM ENSW Product ID: NF 6000R SMP APIC at: 0xFEE00000 Processor #3 6:10 APIC version 17 Processor #0 6:10 APIC version 17 Processor #1 6:10 APIC version 17 Processor #2 6:10 APIC version 17 I/O APIC #14 Version 17 at 0xFEC00000. I/O APIC #13 Version 17 at 0xFEC01000. Enabling APIC mode: Flat. Using 2 I/O APICs Processors: 4 Allocating PCI resources starting at ea000000 (gap: e8000000:16c00000) Detected 699.498 MHz processor. Built 1 zonelists. Total pages: 950265 Kernel command line: root=/dev/sda2 console=ttyS0,57600 profile=2 kernel profiling enabled (shift: 2) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c13ac000 soft=c138c000 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 8192 ... CHAINHASH_SIZE: 4096 memory used by lock dependency info: 696 kB per task-struct memory footprint: 1200 bytes Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3738260k/3801060k available (1847k kernel code, 61660k reserved, 872k data, 172k init, 2883556k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1400.71 BogoMIPS (lpj=2801425) Mount-cache hash table entries: 512 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 12k freed CPU0: Intel Pentium III (Cascades) stepping 01 lockdep: not fixing up alternatives. Booting processor 1/0 eip 2000 CPU 1 irqstacks, hard=c13ad000 soft=c138d000 Initializing CPU#1 Calibrating delay using timer specific routine.. 1398.98 BogoMIPS (lpj=2797962) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K CPU1: Intel Pentium III (Cascades) stepping 01 lockdep: not fixing up alternatives. Booting processor 2/1 eip 2000 CPU 2 irqstacks, hard=c13ae000 soft=c138e000 Initializing CPU#2 Calibrating delay using timer specific routine.. 1398.97 BogoMIPS (lpj=2797949) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K CPU2: Intel Pentium III (Cascades) stepping 01 lockdep: not fixing up alternatives. Booting processor 3/2 eip 2000 CPU 3 irqstacks, hard=c13af000 soft=c138f000 Initializing CPU#3 Calibrating delay using timer specific routine.. 1398.97 BogoMIPS (lpj=2797947) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K CPU3: Intel Pentium III (Cascades) stepping 01 Total of 4 processors activated (5597.64 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. checking TSC synchronization across 4 CPUs: passed. Brought up 4 CPUs migration_cost=3199 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd32c, last bus=8 Setting up standard PCI resources SCSI subsystem initialized PCI: Probing PCI hardware PCI: Discovered peer bus 02 PCI: Discovered peer bus 05 PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:0f.2[A] -> IRQ 19 PCI->APIC IRQ transform: 0000:02:01.0[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:02:01.1[B] -> IRQ 18 PCI->APIC IRQ transform: 0000:02:05.0[A] -> IRQ 24 PCI->APIC IRQ transform: 0000:05:02.0[A] -> IRQ 21 PCI->APIC IRQ transform: 0000:05:02.1[B] -> IRQ 26 PCI->APIC IRQ transform: 0000:06:04.0[A] -> IRQ 22 PCI->APIC IRQ transform: 0000:06:05.0[A] -> IRQ 27 PCI->APIC IRQ transform: 0000:06:06.0[A] -> IRQ 28 PCI->APIC IRQ transform: 0000:06:07.0[A] -> IRQ 29 PCI: Bridge: 0000:05:03.0 IO window: 7000-7fff MEM window: eb000000-ec1fffff PREFETCH window: ea300000-ea3fffff NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 7, 524288 bytes) TCP established hash table entries: 131072 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A loop: loaded (max 8 devices) ibmasm: IBM ASM Service Processor Driver version 1.0 loaded Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 Copyright (c) 1999-2006 Intel Corporation. e1000: 0000:05:02.0: e1000_probe: (PCI:33MHz:64-bit) 00:07:e9:09:4f:54 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection e1000: 0000:05:02.1: e1000_probe: (PCI:33MHz:64-bit) 00:07:e9:09:4f:55 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.de pcnet32: PCnet/FAST III 79C975 at 0x2200, 00 02 55 fc 43 20 assigned IRQ 16. pcnet32: Found PHY 0000:6b60 at address 30. eth2: registered as PCnet/FAST III 79C975 pcnet32: 1 cards_found. e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation e100: eth3: e100_probe: addr 0xefbfd000, irq 24, MAC addr 00:90:27:EE:90:09 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs Vendor: IBM-PSG Model: ST318451LC !# Rev: B833 Type: Direct-Access ANSI SCSI revision: 03 scsi1:A:0:0: Tagged Queuing enabled. Depth 253 target1:0:0: Beginning Domain Validation target1:0:0: wide asynchronous target1:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) target1:0:0: Ending Domain Validation Vendor: IBM-PSG Model: ST318451LC !# Rev: B833 Type: Direct-Access ANSI SCSI revision: 03 scsi1:A:1:0: Tagged Queuing enabled. Depth 253 target1:0:1: Beginning Domain Validation target1:0:1: wide asynchronous target1:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) target1:0:1: Ending Domain Validation Vendor: IBM-PSG Model: ST318451LC !# Rev: B833 Type: Direct-Access ANSI SCSI revision: 03 scsi1:A:2:0: Tagged Queuing enabled. Depth 253 target1:0:2: Beginning Domain Validation target1:0:2: wide asynchronous target1:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) target1:0:2: Ending Domain Validation Vendor: IBM Model: YGLv3 S2 Rev: 0 Type: Processor ANSI SCSI revision: 02 target1:0:8: Beginning Domain Validation target1:0:8: Ending Domain Validation Vendor: IBM Model: YGHv3 S2 Rev: 0 Type: Processor ANSI SCSI revision: 02 target1:0:9: Beginning Domain Validation target1:0:9: Ending Domain Validation Vendor: IBM-ESXS Model: DTN036C1UCDY10F Rev: S23J Type: Direct-Access ANSI SCSI revision: 03 scsi1:A:13:0: Tagged Queuing enabled. Depth 253 target1:0:13: Beginning Domain Validation target1:0:13: wide asynchronous target1:0:13: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) target1:0:13: Ending Domain Validation Vendor: IBM-ESXS Model: ST336752LC !# Rev: B843 Type: Direct-Access ANSI SCSI revision: 03 scsi1:A:14:0: Tagged Queuing enabled. Depth 253 target1:0:14: Beginning Domain Validation target1:0:14: wide asynchronous target1:0:14: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) target1:0:14: Ending Domain Validation SCSI device sda: 35548320 512-byte hdwr sectors (18201 MB) sda: Write Protect is off SCSI device sda: drive cache: write through w/ FUA SCSI device sda: 35548320 512-byte hdwr sectors (18201 MB) sda: Write Protect is off SCSI device sda: drive cache: write through w/ FUA sda: sda1 sda2 sda3 < sda5 > sda4 sd 1:0:0:0: Attached scsi disk sda SCSI device sdb: 35548320 512-byte hdwr sectors (18201 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through w/ FUA SCSI device sdb: 35548320 512-byte hdwr sectors (18201 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through w/ FUA sdb: sdb1 sdb2 sd 1:0:1:0: Attached scsi disk sdb SCSI device sdc: 35548320 512-byte hdwr sectors (18201 MB) sdc: Write Protect is off SCSI device sdc: drive cache: write through w/ FUA SCSI device sdc: 35548320 512-byte hdwr sectors (18201 MB) sdc: Write Protect is off SCSI device sdc: drive cache: write through w/ FUA sdc: sdc1 sd 1:0:2:0: Attached scsi disk sdc SCSI device sdd: 71096640 512-byte hdwr sectors (36401 MB) sdd: Write Protect is off SCSI device sdd: drive cache: write through SCSI device sdd: 71096640 512-byte hdwr sectors (36401 MB) sdd: Write Protect is off SCSI device sdd: drive cache: write through sdd: sdd1 sdd2 sd 1:0:13:0: Attached scsi disk sdd SCSI device sde: 71096640 512-byte hdwr sectors (36401 MB) sde: Write Protect is off SCSI device sde: drive cache: write through w/ FUA SCSI device sde: 71096640 512-byte hdwr sectors (36401 MB) sde: Write Protect is off SCSI device sde: drive cache: write through w/ FUA sde: sde1 sde2 sd 1:0:14:0: Attached scsi disk sde sd 1:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:1:0: Attached scsi generic sg1 type 0 sd 1:0:2:0: Attached scsi generic sg2 type 0 scsi 1:0:8:0: Attached scsi generic sg3 type 3 scsi 1:0:9:0: Attached scsi generic sg4 type 3 sd 1:0:13:0: Attached scsi generic sg5 type 0 sd 1:0:14:0: Attached scsi generic sg6 type 0 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice oprofile: using NMI interrupt. TCP watch registered (port=0) TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI Shortcut mode Time: tsc clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 172k freed Write protecting the kernel read-only data: 316k INIT: version 2.86 booting input: PS/2 Generic Mouse as /class/input/input1 Activating swap. Adding 1951856k swap on /dev/sda5. Priority:-1 extents:1 across:1951856k Checking root file system... fsck 1.37 (21-Mar-2005)